Set 'ELEGANCE' per Bambu e Stampanti Generiche - for Bambu and Generic Printers

Greetings everyone! Many of you were eagerly awaiting the completion of this project. I present to you "ELEGANCE", the universal tabletop kit for Bambu accessories and generic printers. I delayed its release due to some last-minute modifications (those who prototype know that not all donuts come out perfect on the first try). I reinforced the shell with, let's say, beams, modified the container for complete Bambu hotends (without silicone socks) to hide the cables, and opted for a film similar to the FEP used in resin printers or transparent glossy sheets as a window. With that said, I don't want to drag this out, but I'll mention a few recommendations to avoid any misunderstandings.

• The STL file on the page is for publication purposes only; at the end of the page you will find a link to download the completed work for a small contribution.
• Download and carefully read the ITA/ENG PDF guide before starting. Everything is included, complete with photos;
• The tolerances for the drawer file are minimal, this is because I don't know your printers, therefore, especially the flow calibration, it's better to do a bit of post-production removing material to make the drawer fit, rather than having too much space, I always use tolerances between 0.14 and 0.20 for the joints;
• The version with complete Bambu hotends should not be screwed. I made the modification to hide the wires but it should not be screwed. The version that is screwed is the one for generic printers. This modification was made after a final check. So I had to make a decision and come to a compromise.

As always, hoping I've done something that the community will appreciate, if you like, for a small contribution of 5 euros you can download my work at this link to copy in your address bar:

https://cults3d.com/en/3d-model/tool/elegance-set-for-bambu-lab-and-generic-3d-printers

which I will use to develop other solutions or useful contributions, and if you publish it, please cite the source and visit my instagram page @nd_nanodesigner. Good work from “NANODESIGNER”.