Print Profile(1)
Description
A nozzle for a solar fountain as in the photo or another with a 10 mm diameter connection.
The nozzle rotates the fountain and has a downward water outlet, which prevents excess water from being thrown out of the tank.
The nozzle has holes with a diameter of 1 mm. If the holes do not print correctly, they will need to be corrected with a 1mm drill.
I recommend printing the nozzle with a low layer, 0.12 mm or less.
The tube fits quite tightly to maintain a tight seal, if it doesn't want to fit into the fountain connector, lightly heat the tube at the end with a lighter and then press it onto the connector.
If you don't have such a fountain, you can buy it here:
https://pl.aliexpress.com/item/1005005088668232.html
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (25)