Deep Single Holder - Wall & French Cleat - Free 3D Print Model

Search models, users, collections, and posts

NotGrounded

Tools>Organizers

IP Report

Print Profile(1)

All

X1 Carbon

A1 mini

H2D

P1S

P1P

X1E

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.2mm layer, 2 walls, 15% infill

Designer

12.3 h

4 plates

5.0(12)

Open in Bambu Studio

Boost

112

Released

Description

See my other models in the links below the description.

This is a single compartment holder perfectly sized for odds and ends on your work bench. It also works well for pens, pencils, markers, and utility knives of most sizes.

The compartment internally measures:

4" wide x 2.25" deep

4 variations available :

1 with the cleat

1 without the cleat.

1 with #8 screw holes (0.177")

1 with #10 screw holes (0.210")

All will free stand with or without items stored in it. All styles are in the print profile on individual plates.

I also have other holders of similar style available here:

1 compartment - shallow

1 compartment - deep

2 compartment - Full size DVOMs

2 compartment - Half size DVOMs

3 compartment

5 compartment

Affiliate Link for my favorite utility knives, shop pencils, and DVOMs used in these holders:

Fluke 87V with amp clamp

GraphGear 500 0.7mm 500 6 pack

GraphGear 1000 0.7mm 1000

Check out my other collections:

Boost Me (for free)

Here's my shameless plug for your boost rewards.

Comment & Rating (18)

@RunsOnCAFFEINE

Is it possible to make a design that doesn't use nearly half a roll? This looks great, but a wall-full would cost an arm and a leg. Very nice design, however.

The designer has replied

@NotGrounded

You are mistaken a single holder doesn't use half a roll. There's 4 variations in the design on 4 separate plates. A single holder is around 107g. The french cleat version is around 126g because of the support material. Open the design and you will see. you can adjust the print quality to use less walls and less infill, but I prefer the sturdiness of the current setup because its a shop tool and plastic is cheap. A few extra grams isn't going to break the bank for a more robust design that doesn't break.

@RunsOnCAFFEINE

Replying to @NotGrounded :

I see the four plates now. Nice design, now I just need a French cleat wall...

@Jsmit209

What slat thickness is this designed for? 1/2" or 3/4"?

The designer has replied

@NotGrounded

3/4"

@NotGrounded

There's also 2 screw versions to attach to your own cleats.

@MichaXX

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

The brackets are great, thank you for sharing

Show original

@user_2014350673

Print Profile

0.2mm layer, 2 walls, 15% infill

Nickel en PLA

@JaMar

Print Profile

0.2mm layer, 2 walls, 15% infill

This is a super helpful model - exactly what I was looking for for the workshop. Fits great. Perfect print! Thanks for sharing the model!

Show original

@RedAcreDesigns

Print Profile

0.2mm layer, 2 walls, 15% infill

Printed and fits perfectly.

@user_613140607

Print Profile

0.2mm layer, 2 walls, 15% infill

Excellent print. I have made several for my shop.

@sesch04

Print Profile

0.2mm layer, 2 walls, 15% infill

cooles design

@ulrich.dillmann

Print Profile

0.2mm layer, 2 walls, 15% infill

@Saylesscustom

Print Profile

0.2mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Honeycomb storage wall

rostap

46.8 k

15.6 k

French Cleat Clamp Holders

JAR MADE

2.3 k

961

Modular Pegboard Panel (IKEA compatible)

Combo

52.4 k

27.8 k

French Cleat Wall Mount

NocturnalPrince

834

502