2- and 3-way splitter with blast gates for 2 1/4" shop vac (Ridgid)
Copyright Claim
2- and 3-way splitter with blast gates for 2 1/4" shop vac (Ridgid)
Boost
22
63
3
Print Profile(2)
0.2mm layer, 4 walls, 25% infill
Designer
8.2 h
2 plates
0.2mm layer, 4 walls, 25% infill
Designer
13.1 h
2 plates
Boost
22
63
3
0
47
23
Released
Description
Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4 bolts) or glued on after you slot it in the gate.
Gate slots are sized so a ¼" chisel makes very quick work of cleaning out the supports.
Print with snug supports (see pics for what you end up with). PETG or ABS recommended, probably 4+ wall layers for strength. Printed mine with PETG.
Comment & Rating (3)
All
Print Profile
0.2mm layer, 4 walls, 25% infill
absolutlez perfect, i just changed siye so its perfect for 50mm pipe
1
Reply
Print Profile
0.2mm layer, 4 walls, 25% infill
Support Issue:
die Stützstrucktur lässt sich sehr schwer entfernen
The designer has replied
0
Reply
What was the specific problem you had? For me, the support came off super easily for me with a 1/4" chisel (6mm would work just the same) scraped sideways with one swipe. A file would also help clean it up. I might update the documentation to make that clearer, thanks!
0
Reply
No more
© 2024 MakerWorld