Search models, users, collections, and posts
Raspberry Pi 5 and 4 - Official Case - SSD Adapter
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
1.6 h
1 plate
Open in Bambu Studio
Boost
93
298
35
11
501
204
Released
Description
Introducing the Raspberry Pi 5 and 4 SSD Mount Adapter – a sleek, 3D printed accessory that seamlessly connects the official Raspberry Pi case to a 2.5-inch SSD. Designed for easy installation, this adapter maintains the compact aesthetics of your setup while securely holding the SSD in place.
To mount it you will need:
4 x Screws M2.5x16 (To secure the official PI Case to the Mount Adapter)
4 x Nuts M2.5 (To secure the official PI Case to the Mount Adapter)
4 x Screws M3x6 (For the SSD)
Do you prefer not to use the case? The holes are suitable for installing directly on the PCB of the Raspberry Pi 5 or 4. Just print the 4 spacers, and you are all set.
Click here if you need the 2 x SSD Version.
Click here for the VESA 75 / 100 ADAPTER
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (35)