Life Counter 0-999 by AMT_MW

AMT_MW

Toys & Games>Board Games

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

Two colors - 0.16mm layer, 2 walls, 25% infill

Designer

21 h

3 plates

5.0(3)

Boost

Released

Description

What it is

A three digit life counter with a small compartment inside, a screw on lid and detents for the number positions.

It is part of a design family, so you do have more options if you want it a bit different:

How to print

For multicolor printing and convinience, a 3MF file is provided. There are several modifiers present, deactivate or change them to get your desired outcome.

Recommended for printing is a layer height of 0.16mm and a 0.4 mm nozzle, but up to a layer height of 0.2mm and a 0.6mm nozzle the results have been surprisingly good as well.

The optional text on the lid or Axle (like HP & XP) simply is added via the text shape tool of the slicer. Any font you have installed is possible.

Material at one's discretion, I opted for PETG and 25% infill.

Scaling it down is possible, if smaller than 60% the tolerances may become a problem.

Without MMU or AMS

If not already printed as multicolor, nail polish or model paint works well to highlight the glyphs. For text on the axle or lid a manual filament swap is advised, using the text shape tool to emboss your text may also be an option.

What next

There may be improvements and modifications based on feedback given here.

Maybe, take a look at my other designs ;-)

Comment & Rating (6)

@dragonsprintden

Boosted

can you make a profile for this with single color. I don't have an ams and running straight off the app right now. computer exploded so need a new one for the slicer

The designer has replied

@AMT_MW

MakerWorld specifically advises against uploading separate profiles for colors. – If you want to print it as single color version from the app: · Click “Filament Assignment” when preparing the print · Click “preview colors” · Simply map every offered color to the single one of your choice · Print

@dragonsprintden

Boosted

Replying to @AMT_MW :

ok thanks for that info.

@cakre

Boosted

Print Profile

Two colors - 0.16mm layer, 2 walls, 25% infill

Really great print. Tight fit, but not too tight.

@Tegernako9

Print Profile

Two colors - 0.16mm layer, 2 walls, 25% infill

@Doghead

Print Profile

Two colors - 0.16mm layer, 2 walls, 25% infill

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.