"Zip Tie Buddy" Spark Plug Wire Separators 3 Sizes

I'm that guy that uses too many zip ties. So I developed “Zip Tie Buddy” as a way to not only make your zip tie installations look more “clean”, but also to keep your wires, cables, hoses, etc routed more securely, and ultimately give a more professional looking installation any time you use them. “Zip Tie Buddy” is a 2 piece cable clamp that secures with a single standard zip tie. “Zip Tie Buddy” keeps you work piece clamped tightly, while also providing some separation of the work at the same time.

In this “upload” I am including 2, 3, and 4 wire separators for 8mm (MSD Street Fire), 8.5mm (MSD Super Conductor), and 8.8mm (Accel Spiral Core) spark plug wires. ***Edit 4/30/2025: I have added 7.0MM modeled off of a Belden plug wire set from Napa Auto Parts.*** Please note that there is one print profile with ALL sizes on individual labelled plates, and there are also STL files included separately. 

***PLEASE NOTE: I only modeled these on 8.5mm MSD Super Conductor wires, and I made the other sizes based on the wire specification size, so those may be very slightly small or large. The print profile is set to ABS and scaled to 101% to allow for shrinkage, which worked well on the 8.5mm wires. I would recommend printing one wire separator to test for size, and adjust with +/- scaling by a percentage point or two if necessary. Please provide any feedback and I will make adjustments accordingly. 

If you check my profile I have already uploaded many other sizes and varieties of “Zip Tie Buddy”, but if you need a custom size or orientation (more clamped items), please ask and I will do my best to accommodate your request.  

If you feel that my work has helped you and you would like to help me back, please feel free to “Buy Me a Coffee”: https://ko-fi.com/crazycaseyscustoms , or it is also highly helpful if you would like to subscribe to my YouTube channel linked in my profile.

Thank you, and happy printing!

Sincerely,

Crazy Casey