Mustang Dark Horse MINI-Z 1.28 RC Chassis 90mm

This model is assembled in a slicer from the original and prints as a single part.
The original https://makerworld.com/en/models/505871-1-10-mustang-dark-horse-rc-car?profileId-951396#profileId-951396 is excellent, but it's scaled at 1:10 and is assembled from multiple parts. For 1:28 scale, assembly from parts is unacceptable—the gaps are too large.
I use this shell for greate chassic: https://makerworld.com/en/models/26911-fully-printed-1-28-rc-car-chassis-mini-z-compatibl#profileId-1257993 

Changes:

• Wheel arches enlarged to allow full suspension travel.
• Inner part of the rear bumper cut out for proper fit on the chassis.
• Added mounting details for attaching to the chassis.

Attention! Friends, printing this model is challenging (for me it was 3 attempts with different settings and orientations of main body), and you might not succeed on the first try. Don’t leave bad ratings — if I managed to print it, so can you.
You can try changing the body orientation from vertical to horizontal — maybe you'll like the result better.

Tip: I smoothed the black parts with dichloromethane, just applying it with a brush — it looks much better than unsmoothed.

Assembly notes: You need two 6x3mm magnets for front mount. I intentionally did not print the mounting points on the body—you may want to adjust their position to fit your chassis and wheel size. Check the photos — they show approximate mounting positions as a reference.