MMS humidity protection (with standard 4L Airtight box as the cover) - Free 3D Print Model

Search models, users, collections, and posts

HenryFang亨利方

3D Printer>3D Printer Accessories

IP Report

Print Profile(1)

All

X1 Carbon

P1S

P1P

X1E

H2D

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 10% infill

Designer

5 h

1 plate

4.0(5)

Open in Bambu Studio

Boost

219

227

Released

Description

This is a new application of my “print in place spool holder Lite”, It use standard 4L airtight box as the cover.

Below is the Taobao link of 4L airtight box. You can find other same size box in Amazon or other place of your country.

4L米桶5.8升密封罐五谷杂粮收纳盒食品级窄存米箱5斤装面粉储粮桶-淘宝网 (taobao.com)

follow below pictures as your installation guideline.

Comment & Rating (27)

@marcelcountry

Print Profile

0.16mm layer, 2 walls, 10% infill

The PTFE tube does not fit. The hole is too narrow I will change my rating when the problem is resolved. Thank you

(Edited)

The profile uploader has replied

@brenden.mulhern

Agree same problem now I might try and file this one down since I printed and don't want to waste it but file needs to be fixed and updated. I will be glad to give it a 5 star when issue resolved. Seems like a simple fix but I am not a designer so hopefully I'm right. Designer let us know when you upload the new one please

@HenryFang

Replying to @brenden.mulhern :

I think it is because my PTFE is little bit narrow than yours. please let me know your PTFE diameter. but i think it is easy to enlarge the hole by knife, because i just shrink the dimeter for the end of the tunnel. i have no idea why i can`t upload any model now. can you? I acctually have a totally new revision, but can not upload success.

@marcelcountry

Replying to @HenryFang :

4.02 diameter PTFE

(Edited)

@HenryFang

Hi friends, please note that i have already enlarged the hole size for the PTFE for some people told me their PTFE is little bit bigger than normal. the new size is 4.5mm. Additinally notify you, my brand new revsion of MMS has already posted. And it is a revison with material rollback function, it can protect your materal better more in air dry box. please find it in my zone. see bleow GIF. @marcelcountry @brenden.mulhern

GIF

@19maury85

Print Profile

0.16mm layer, 2 walls, 10% infill

@0.0yaoming

May I ask why the side of this base where the bearing is placed is raised a section If it were a bit lower I feel it could be compatible with more filament

The designer has replied

Show original

@HenryFang

I'm a bit confused Are you saying the space below needs to be larger Isn't there a rack and pinion mechanism below Could you provide a picture to explain

Show original

@0.0yaoming

Replying to @HenryFang :

I am referring to the old design without the recycling function

Show original

@HenryFang

Replying to @0.0yaoming :

Place desiccant below

Show original

@ahewitttt

Print Profile

0.16mm layer, 2 walls, 10% infill

The profile uploader has replied

@HenryFang

Thanks for 5 stars. Follow me, i will post new version this week. That will be better than this one.

@marcelcountry

Replying to @HenryFang :

What changes have you made in the new version?

(Edited)

@HenryFang

Replying to @marcelcountry :

it has material roll back function. i am trying to upload it, but not success. seems like makerworld are doing something these days, it always have some problem.

@aKeshaKe

Can you stack them on top of each other?

The designer has replied

@HenryFang

I think that a great idea.

@MrUnknown

Hey, i Like your Product. It works nicely. I need a link for the airtight Box. 🙌🏼

The designer has replied

@HenryFang

see description of this model.

@brenden.mulhern

Print Profile

0.16mm layer, 2 walls, 10% infill

Turned out as expected and I appreciate it

@TheHooptyHobby

Boosted

Print Profile

0.16mm layer, 2 walls, 10% infill

very good design. but I ended up needing to create a seal out of you for it.

@TheHooptyHobby

Boosted

could not get the box to fit with the selq that came with it, so I made a TPU seal that works great with this. https://makerworld.com/models/698540

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.