Rotating Footstop RaceVersion
Print Profile(1)
Bill of Materials
- 2"panheadSkatehardwareBolt x 1:
- Washer x 1: OD15mm;ID5.3mm
- SkatehardwareNylocNut x 1:
- Built-In-Bearing x 2:
- SteelSleeve x 1: 26mmLong;OD8mm;ID5mm
Description
Boost Me (for free)
If you like this model maybe consider giving me a boost. This helps me to provide more free downhill skate gear in the future. Thanks!
Meant for personal/private use only. Distributing without active membership plan is prohibited.
This rotating footstop is designed to be very rigid and withstand high load forces when using big square lipped grippy wheels. The bearings and the steel sleeve [need to be sourced external] support the mounting bolt, so it won't bend.
The 26mm long steel sleeve has an outer diameter of 8mm and an inner diameter of 5mm. In my opinion it is necessary to make this footstop work properly. You should find some suitable stuff in your local hardware store.
The internal stop should be printed out of 65D or harder TPU. Do NOT USE PETG since it will soften too much in your car on a hot summer day and maybe will fail. TPU can withstand higher temperatures.
You also will need two standard built-in bearings from any brand, at least one washer [OD 15mm, ID 5.3mm], a 2" long panhead bolt and a suitable nyloc nut for the bolt.
Use at your own risk.
Membership
If you want to distribute this footstop on your own, or want to use the internal stop design for your own footstop design feel free to subscribe to my membership plan. This will help me to provide more tested downhill gear to print for you.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)