Print Profile(2)
Description
I have created 2 versions of back screw. You can print version with standard hole and version for ESP32-C3 supermini.
If you print a version with standard hole, generally most of the LEDs should fit.
In case of issues with in-place printed hinge, there is a separated version attached. But give it a little and gentle “wiggle” after printing and it will be fine :)
Following materials has been used in this project (version with ESP32 back screw):
LED: WS2812B on PCB: https://aliexpress.com/item/32560280169.html
ESP32 C3 Supermini: https://aliexpress.com/item/1005006599545782.html
App to control it remotely from phone: https://play.google.com/store/apps/details?id=ca.cgagnier.wlednativeandroid
You have to solder 3 wires and program module using online programming tool (no programming skills required. Just connect and press the button :)) Here is how to do it:
Boost Me (for free)
If you like my work, leave a boost. It's free! :)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (5)