Storage box for Hearing Aids and batteries V2

This is V2 of my storage box for Hearing Aids. The previous version used magnets to secure the lid, but some have commented that magnets can affect some Hearing Aids. So, this version uses a simple catch and the hinge is a length of filament.

The V2 box is the same size as the previous version at 75x45x20mm (internal dimensions). Within the lid is a slot to take a packet of 8 batteries (the battery packet is 44mm wide), so these are kept safe until needed.

Note: the battery packet has a perforated top strip that has to be removed to fit.

To assemble, cut a length of filament and carefully secure with a drop of CA (Super) glue at either end. When the glue is dry, then trim to length with snips.  

==Edit==

V3.1 - the lid has a fillet added on the inside to help with sliding the battery packet out.

New version now added with an extra compartment for a packet of Silica Gel can be found here: https://makerworld.com/en/models/1359202-hearing-aid-storage-box-with-silica-gel#profileId-1403492

The old versions with magnets can still be found here: https://makerworld.com/en/models/1252173-hearing-aids-batteries-storage-box#profileId-1274908

If you like this design or find it useful, a “Thumbs-Up” is great, click the “Follow” button… or even buy me a coffee   https://buymeacoffee.com/purpleshark

Collections of other 3D designs…

Animatronics - https://makerworld.com/collections/14084829

RC Mini Stock Car - https://makerworld.com/collections/6152951

Campervan - https://makerworld.com/collections/6682136

Garden Wildlife - https://makerworld.com/collections/6935707

All the rest - https://makerworld.com/collections/6793171

I, Antonia-Jayne Parker, own the copyright to my designs & the moral right of the designer has been asserted.