LoveSac Riser Shoes - Free 3D Print Model

Search models, users, collections, and posts

Subsven

Household>Other House Models

IP Report

Print Profile(2)

All

H2D

H2D Pro

X1 Carbon

P2S

P1P

P1S

H2C

H2S

X1E

X2D

A2L

0.6mm nozzle, 0.3mm layer, 2 walls, 20% infill

Designer

32.8 h

5 plates

5.0(7)

X1, P1, A1 - 0.4mm nozzle, 0.28mm layer, 2 walls, 10% infill

44.2 h

6 plates

5.0(2)

Open in Bambu Studio

Boost

235

134

Released

Bill of Materials

Bambu Filaments

Select all

PETG HF

Description

4.5"/114.5mm riser shoes for your LoveSac Sactionals sofa! I found a few of these on some online stores but couldn't find a good object file, so I opened up Fusion and made some myself! I see people selling these, but I want to make these free to use and modify, just to share the wealth. This is my first ever CAD design, and first ever fully self created model. I printed these on an H2D, and I think that all of them except for the full 4x4 will print on smaller printers like the P1 or X1 series.

I made these exactly 4.5"/114.5mm tall, but only the exterior sides are sloped. If you want them taller or shorter, they should stretch out/cut just fine. I included my self designed .stl exports from Fusion as well. I printed these in PETG-HF, with a .06mm nozzle and .30mm layer height. I didn't use a lot of infill to save on cost (the 4x4 uses 800 grams of filament alone), so thicker walls and first and last layers are a must.

Feel free to print, share, and remix, but please credit me if you do, and I'd prefer if you didn't use these to supply a model store. The whole reason I created these was because I could only find them in places like Etsy, and I'm sure somebody will find them useful. Let me know how they work out!

Comment & Rating (30)

@eschnoerr

are there special parts for the recliner. I have 2 recliners in my 6 set.

The designer has replied

@user_1153291334

I am wondering this too!

@subsven

I don’t have the recliner so I don’t have a reference to design around, sorry.

@eschnoerr

Replying to @subsven :

I am working on one will know soon if it works.

@Aardvarkspleen

Thanks a ton! was able to print on an x1c, had to scoot the 2x2 around a bit, but it does fit. Edit: Also, the power brick for the stealthtech audio system just fits inside the 2x2.

(Edited)

@Lewman78

Boosted

working my way through printing this. so far seems pretty great. I've ordered a felt pads to place in the bottom to keep it from scratching the floors. https://amzn.to/4lZd1Yx it does take a long time to print, and a ton of filament. I have a pretty big couch, so I think I'm probably going to use about 12 to 14 kilos. so while that's probably about $150 worth of filament. it's much cheaper than the people selling this on Etsy where one piece alone is $50. great work and putting this out there. thank you so much. I can't wait to have the underside of my couch cleaned by the robots. it gets pretty gross under there.

The designer has replied

@subsven

Thanks! I have a big 8 piece setup as well. It took about a full week of nonstop printing and about $150 of filament as well. I’ve been sitting in it for months now and we love it. Sooo much easier to clean under.