SCREEN CASE FOR CLAA154WB05AN (15.4'')

I designed this screen case for a CLAA154WB05AN screen (from an old laptop).

The specs of the screen are available here: https://www.panelook.com/CLAA154WB05AN_CPT_15.4_LCM_overview_2750.html

Thanks to ronan.tolla for his great stand design which I used and adapted in minor places. You can find his instructables here: https://www.instructables.com/3D-Printed-Mini-5-Inch-Monitor/

Only tested with Creality CR-20 Pro.

Glued together
Designed a screw for the case holder and the mount.

The design is cut in pieces to fit small printers.

You will need to purchase a LCD controller online and paste the components to the back of the screen accordingly.

Warning: There is very low tolerance on the pieces, you will need to make sure your bed is levelled perfectly.

I've also shared the raw stl files and blend if you wish to join the parts together for an easier print.