Miniature Claw Gun - Free 3D Print Model

Search models, users, collections, and posts

sdaendi

Toys & Games>Other Toys & Games

IP Report

Print Profile(1)

All

P1S

A1 mini

P1P

X1E

H2D

X1 Carbon

H2D Pro

H2S

P2S

H2C

X2D

A2L

PLA Basic Profile

Designer

1.1 h

1 plate

4.3(24)

Open in Bambu Studio

Boost

611

1003

640

236

Released

Bill of Materials

Maker's Supply Kits and Parts

Select all

PTFE Tubes

M3 Socket Head Cap Machine Screws (SHCS)

Description

Have you ever wanted a phone case with no compromises?

Check out my new Custom Phone Case Generator: CaseStudio

Boost Me (for free)

Do you like my model? A boost is completely free for you, and you really help me a lot to create more models like this in the future. Thank you very much

This mini claw gun is perfect for a challenge with colleagues to see who can collect more filament poop at once. You can determine the length yourself by using a longer or shorter PTFE tube, but be careful, it can quickly become very difficult if the tube is too long.
Especially if you have bought a combo version of the printer, you will probably still have PTFE tubes available.

Building instructions:

First you have to cut off a piece of filament, light it and if it burns, blow it out immediately and then press it into the part with the smaller hole as quickly as possible.

Then press a PTFE tube of any length into the other part and bring the two together as shown in the picture.

Now feed the other end of the filament through the handle as shown in the picture. Leave about 2 cm of space between the tube and the handle and about 1 cm at the end.

Now light this too, pull the filament out a little and then press it onto a smooth surface.

Assemble everything as shown in the picture and then screw on the cover. Make sure that the PTFE hose is approximately in the middle and do not tighten the screws yet so that you can easily pull the hose back and forth later.

Finally, all you have to do is clamp the grippers, you can now push the PTFE hose a little forwards or backwards so that the grippers work properly, and when it is well adjusted, tighten the screws completely

Membership

If you like my work and would like to support me or sell my models, you can subscribe to a membership here.

Join

Comment & Rating (50)

License

If you want to use this model commercially, please join my membership.

Join Now

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

5-15 Shot Mini-Finger Blaster

TLPOD

14 k

6.9 k

GIF

Mini Claw Machine

Print3DMichi

932

1.5 k

Skyrim The Golden Dragon Claw

3DMN

1.7 k

887

Halloween Ghost Cat Sharpening Claws

OddPlasticity

693

284