Fanttik Solder Brass Tip Cleaning Tin/Bin/Holder

Updated: `2025-04-17` 

So I did not take into consideration that the fillets on the bottom lip/edge would sit on the base's arm. This version has been updated to address that issue with a cutout. 

I love my Fanttik T1 Max Soldering Iron, it has become my go-to for iron, when I want to work at my desk instead of the workshop. It's also stunning, heats up in seconds and is consistent with maintaining temp… Oh and it is cordless. What I'm not a fan of is cleaning my tips with a soldering sponge/foam pads just to leave burn marks on them. 

So I designed this bin/tin/holder for brass/wire tip cleaners, which fits into the base plate of the T1 Max's soldering station. I'm using PLA, but I'm sure any filament will work. 

How to Print:

All of these settings should be in the 3MF file - but if you downloaded the STL or STEP file to print instead, then update your slicer settings.

1. Make sure you enable `Variable layer height` and set `Quality/Speed` to `0.00` (move the slider all-the-way to the left)

   1. 

2. Click the `Smooth` button one(1) time. 
3. Under `Strength` change the `Sparse infill pattern` to `Adaptive Cubic`
4. Under `Support` change everything in the below image - these settings are some of the best I have used for supports

   1. 

5.  (Optional) Under `Other`, I enable 3 `Skirt loops` and `Flush into objects' infill` 

Please note: 
If you're using the Bambu Handy app, all the settings from the 3MF file will be stripped, this is a limitation of the mobile app.