Trampoline tube clamps 26mm 34mm

Replacement clamp kit for clamping the upright poles to the base of the trampoline.  For clamping 26mm diameter pole to 34mm diameter pole.  Allows poles to be clamped together without deforming the poles when the nut and bolt is tightened.  Picture shows original part and my design side by side.  Also moves the poles out slightly to prevent the uprights from rubbing against the skirt of the trampoline.

File is for one set for one pole.  If your trampoline has four uprights, you will need to print off four sets.

Printed in BambuLabs PETG HF filament as parts will be used outside.

Use M8 x 100mm joint connector bolts (https://www.accu.co.uk/joint-connector-bolts/649969-SJCB-M8-100-ZP) and M8 flanged nuts (https://www.accu.co.uk/metric-flanged-hexagon-nuts/409654-HFFN-M8-A2).  2 off of each required for each upright.