Milwaukee M12 XC5.0 Battery Case Replacement - Free 3D Print Model

Search models, users, collections, and posts

Chevy67

Tools>Machine Tools

IP Report

Print Profile(2)

All

X1 Carbon

H2D

A1 mini

P1P

X1E

P1S

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

3.6 h

1 plate

4.7(27)

PETG - 0.2mm layer, 6 walls, 25% infill

2.8 h

1 plate

4.5(22)

Open in Bambu Studio

Boost

621

1560

2.1 k

1.2 k

Released

Description

Milwaukee XC5.0 Battery Case Replacement - Top Body. Printed with PETG-CF. This is a poor design from Milwaukee and I've had the little clips snap off a few batteries but doesn't fall under warranty.

Comment & Rating (76)

@TysonHoeft

Boosted

Prints well, would it be possible for you to upload the STEP so it can be adjusted for the 4ah and 6ah?

The designer has replied

@chevy67

Yup can do!

@Jamie87k

have you created a 4/6 version ?

@TysonHoeft

Boosted

Replying to @Jamie87k :

I'm working on it as I can. Even with the step file it is taking quite a bit of tinkering. Fusion has crashed on me multiple times. When I get one that works I'll put it up, and link here or however that works.

@user_195936010

Boosted

printed great, great suitable replacement for damaged tabs. My filament definitely needed to be dried before I made this but it still printed fully functional. Great work, would it be possible to put some sort of friction spring behind the release button to achieve higher holding force. seems it can be pulled out semi easily. but really great. update: able to achieve great fitment and retention with the help of an o-ring.

(Edited)

@NEETBux

Printed in abs, installed on my battery and immediately cracked on a layer line, I’ll reprint it to try to get better layer adhesion. Fits and works so far, haven’t used it yet though

@Sean.

Print Profile

PETG - 0.2mm layer, 6 walls, 25% infill

perfect print. pla+ black

(Edited)

@user_4026192482

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_1338846196

Boosted

Print Profile

0.16mm layer, 2 walls, 15% infill

Can consider tilting this on the build plate + tree supports. Surfaces will be a lot smoother

The profile uploader has replied

@chevy67

I initially printed it on an angle, but when I did so, one of the "clips" printed poorly. The orientation loaded seemed to print the most functional.

@user_602774175

Replying to @chevy67 :

yes ive had that problem aslo just on the one side

@MB_AUZ

Just a question are you able to use the original screws?

The designer has replied

@chevy67

Yes, but you will have to drill the hole out slightly. I made the posts solid where the screw goes in for additional support.

@chevy67

Sorry for the late message! The screw locations have a solid body in that location, they will need to be drilled out to ensure the threads have enough plastic to hold. Hope this helps!