REP x PÉPIN Fast (Reppin) Addon weight holder - Free 3D Print Model

Search models, users, collections, and posts

BeardedMachine

Hobby & DIY>Sport & Outdoors

IP Report

Print Profile(1)

All

P1S

X1E

X1 Carbon

H2D

A1 mini

P1P

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.24mm layer, 4 walls, 8% infill

Designer

3.3 h

2 plates

5.0(4)

Open in Bambu Studio

Boost

Released

Bill of Materials

List other parts

M5_DIN_7991_35mm x 2:

Description

!!! Important

This design is a fan-made project and is not affiliated with, endorsed by, or sponsored by REP. All trademarks, logos, and brand names are the property of their respective owners and are used for identification purposes only.

REP x PÉPIN Fast (Reppin) Addon weight holder made for the 85lbs version. All the versions of the dumbbell are using the same cradle size, so there is some free space when you buy the 85lbs version, since the addon weight has no designated place in the cradle, I created this insert with guides which enables the user to slide in and store the addon weights in the unused place of the cradle.

For 2 dumbbells you need to print this 4 times (8 printed parts).

The print consists of 2 parts which are then screwed together with 2x 35mm M5 DIN7991 screws.

The printed parts on the images are printed in PLA.

Boost Me (for free)

If you found this helpful, boost me!

Comment & Rating (11)

@Tailored3D

Print Profile

0.24mm layer, 4 walls, 8% infill

The profile uploader has replied

@user_2096255176

Amazing, thanks, so good to see others using it!

@ellzbellz

Thanks for the design! Just curious, though - why two pieces that screw together rather than a single piece?

The designer has replied

@user_2096255176

Sure, thats just my personal prefference of printing, I hate overhangs and and supports. I know it could be printed in a different direction but then It wouldnt come out that nice.

@ellzbellz

Replying to @user_2096255176 :

Thanks for the response! I don't have the screws needed on hand so I might try fusing the two parts together in a slicer (and glueing the one I already printed together 😅). Will report back.

@user_2096255176

Replying to @ellzbellz :

let me know if it works out, if not try to make a bigger hole from one side and a pin from the other side, and glue that pin in the hole, if you need I can create an alternative design, but you will get the screws faster from any hardware store.