Long March 2F carrier rocket
Print Profile(1)
Description
The Long March 2F carrier rocket, 65cm tall, takes a total of 16 hours to print and consumes over 500 grams of filament. Printable on an A1 mini.
The source files include a PDF for stickers, which I printed using a color printer. A decal transfer might be better (I haven't tried it).
You will need to prepare four M3*10 screws, five M3*150 screws, and some adhesive for smaller parts.
To increase strength, I used an M6*450mm bolt with two M6 nuts. However, these bolts are not easy to find; I bought a 500mm one and cut it myself. Theoretically, you can omit this bolt and use only adhesive; however, when printing, it's best to increase the wall count for added strength.
If your white filament is highly translucent, increase the wall count to four layers maximum.
Assembly instructions below:
Boost Me (for free)
Show some love with a little rocket!
Documentation (1)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)