Poops Recycling Machine V3

Poops Recycling Machine V3 AVAILABLE NOW  🛠️ - Works will all sizes of drill bit

What do you do with your poops ? Do you throw it ? Nooooo print this machine, cut them in little parts, and melt them thanks to an iron. Then create an artistic object ✔️

This machine works like that  (GIF of the first version)

How to print ? 

1. Use the Main profil to print it quickly ✔️ I used PLA, the print is very strong, so don't care about the strenght. 

      2. Use the second profil to Print the drill piece depending of the size of your drill, select the good plate in the profile so. If your size isn't here, you can modify the files in Bambustudio. Just modify the size of the hole. Then, if you want, publish you profil with the name of the size you created.

How to assemble it ?

1. Print your drill hole part at the size you need.
2. Assemble the drill hole part into the machine

1. Add the security piece in the other side.

   

All is good ✔️⚒️

Material required : 

• A drill bit
• A screwdriver 
• A joint clamp
• The 3D printed model

How to use ? 

• Put the Poops Recycling Machine on the edge of a table. 
• Attaches the machine to the table with a joint clamp
• Place your screwdriver on the table, the drill must go into the machine. If the drill isn't horizontale, you have to mount the machine or screwdriver so that everything is perfectly aligned
• Put your poops into the machine, and switch on the screwdriver 

⚠️Caution : Never put your fingers into the machine if the screwdriver is in place !⚠️ Even if the mechanism has been made enough thin to prevent people to put their finger into it ! Do not try !

How to create your own Frame ?

• Put your poops parts into a sheet of baking paper, folded in 2.
• Use a hot iron (180°C to 240 °C) and melt the poops together. 

• 

• Then cut into a sheet of paper, a beautiful image. 

• Finally, put the paper and the poops plate into the Frame :)

   

•