Disc shooter (milk cap shooter)
Print Profile(1)
Bill of Materials
- 6x20mm Stainless steel Dowel Pin x 1:
Description
- Spring d5,5x12mm 1x (can be also 7x15)
- Metal pin d6x20mm 1x (can be 5x20 but there will be space in socket)
- bolt M3x22 8x
- nut M3 8x
- bolt M4x20 2x
- nut M4 4x
- rubber circle shape lenght 60 mm
If you haven´t milk caps, you can print discs, they are part of print file
- All parts what you need
2. Assebly spring with trigger, insert pin to handle, gray handle part with pocket for trigger and insert trigger
3. Close with grey part with pocket
4. Add second handle
5. Use four bolts M3x22 (25) and four nuts M4 to strong connection of all parts
6. Prepare upper part with twoo black parts and four M3x22 (25) bolts
7. Assembly this part onto handle part for holes and connect it with four nuts M3
8. Into holes use two M4x20 with two nuts M4 on top and two nuts M4 on bottom
9. Add rubber between M4 bolts
10. Read for shoot. During charging pull trigger, disc will lean on it
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)