A1 / A1 mini Extruder Front Cover Part
Print Profile(1)
Description
Boost Me (for free)
– German translation below --
An extruder cover designed for the BambuLab A1 / A1 mini. AMS is necessary due to its multicolored design.
Gently grasp the original cover at its base and carefully pull it forward before removing the top section.
Assemble the printed cover by reversing this process.
Printing time: a mere 40 minutes!
I recommend PETG as the printing material owing to its flexibility. Utilize 100% infill.
-------
An extruder cover for the BambuLab A1 / A1 mini.
AMS is required because it is multicolored.
Hold the original cover at the bottom and carefully pull it forward, then remove the top.
Assemble the printed cover in reverse order.
Printing time only 40 minutes!
I recommend PETG as a material due to its flexibility, and 100% infill.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (66)