Shelf Clip with Anti-Roll Bump and Name Tags

Shelf Clip Storage System - with Filament Type Tags

NOTES:

UPDATE: FIXED - 4.9.25 - I have been made aware of an issue in scaling from CAD to BLS that needs corrected. I will be correcting that tomorrow and will post following completion.

1. Magnet sizes on the nametags only - are not correct for the Maker World Magnets, they need to be increased. or the magnets for the name tags will be of a different size. (Something I wanted to try and avoid.

This is version 2.1 - if you find something isn't quite right, let me know, I will address is immediately. Thanks!!!

If you're looking for a great way to store your endless rolls of filament and still be able to see what you have, this is your answer. This shelf clip can be placed on the edge of the shelf and adhered with a Tension for "Interference Fit" (for the engineers out there) double stick tape, hot glue, stick tape, Velcro, the options are endless. The clip has a “speed bump” to stop the roll from falling off the shelf (even if the shelf isn't quite level), and then you can add the type of filament on the tag. Some of the most common types are included in the project, the option is yours if you want a tension fit with pegs, or if you want to use magnets. I have included the Bambu store link for magnets should you choose that route. 

2 shelf sizes sets are includes;

1. 1" Shelf or 26mm
2. .75" Shelf or 20mm

(If your shelf is a different size, please let me know and I will adapt a set for you!