Clucky

cover

throne-3_75486454-8ffe-47a4-b583-6d20ca80168b.jpg

throne 2_b3c96784-b718-4d52-a969-728cc9e08a0a.jpg

plate_1.png

throne-1_a18304b0-cdcf-41a7-9428-3c7f5e4931c7.webp

.16mm layer height, 15% gyroid, no supports

Support Free Iron Throne

LubosCzech

IMG_0775.jpeg

Scaled down to 95% to fit A1 mini.Different color for base

(95% scale) 0.16mm layer, 2 walls, 15% infill

tusekic

IMG_2497.JPG

This profile is designed to minimize ABS warping during printing and eliminate lifting. Chamber pre-heat recommended.<ul><li>infill 10% grid for even internal stress</li><li>large brim</li><li>higher bed temp</li><li>reduced speed</li></ul>

ABS profile (Acetone vapor smoothing) 0.16mm layer

Random stuff

iron throne 4.jpeg

Iron throne.jpeg

Iron throne 3.jpeg

Iron throne 2.jpeg

iron throne.png

•WARNING!!! THIS MODEL IS PROVEN TO BREAK if you aren&#39;t cautious. •You can place a L E G 0 minifigure (: in this•This is a 50% smaller version with 0.2mm nozzle (so it holds his details) so it costs 7 hours not 13 and an 6th of the big models filament, however there is a little support peace, that I marked with a red circle in one of the pictures. (if the thing it holds snaps of you can&#39;t really see the difference, so don&#39;t worry) &nbsp;OH colors (done with PowerPoint)

Same detail 6th of the filament (0.2mm nozel 83mm)

Iron Throne with another base

The Iron Throne remixed to have a smaller base to save some filament. This design prints with no supports, just slow down for overhangs and a little clean up may be required around the back side.

Iron Throne - No Supports

Peace

Iron Throne Beauty Blender Stand

ASIA

Print Profile(4)

Description

Comment & Rating (553)

This remix is based on

License

Remixes (1)

Related Models