AirTag Key Holder - Free 3D Print Model

Search models, users, collections, and posts

glacialofficial

Tools>Other Tools

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

H2D

A1 mini

H2D Pro

H2S

P2S

H2C

X2D

A2L

0.16mm layer, 2 walls, 15% infill

Designer

49 min

1 plate

4.7(10)

Open in Bambu Studio

Boost

350

216

166

Released

Description

I've been on a mission to reduce the footprint of my keys on my keychain for a long time. I've seen other switchblade designs and loved them, but I wanted an easy way to hold an AirTag as well.

This key organizer holds an AirTag and three keys, and is held together with four M3x8mm bolts and four M3 nuts.

IMPORTANT: If you leave your keys outside or in a hot car, make sure to print this is PETG or ABS (even better). Do not print in PLA, otherwise the part may melt in extreme heat!

Comment & Rating (12)

@user_3444292120

Print Profile

0.16mm layer, 2 walls, 15% infill

Printed very nicely! the screw holes needed a tiny bit of cleanup but everything fit together easily

@Geardog71

nice print🤙🏾

@Leotronics

Print Profile

0.16mm layer, 2 walls, 15% infill

Really nice designed! I hadn’t had the right screws und nuts but it worked well to assemble it…

@Harry86

Print Profile

0.16mm layer, 2 walls, 15% infill

Fits perfectly Thanks for that

Show original

@Wacyt

Print Profile

0.16mm layer, 2 walls, 15% infill

The slots for the nuts were a little small, but nothing a hammer and some small steady taps could handle. Definitely no more that 3 smaller keys, but I wanted something simple for a set of work keys so this hit the spot

@3dwelshman

Print Profile

0.16mm layer, 2 walls, 15% infill

Other Issues:Print was good. screw holes need some work and dont fit m3 nuts. unfortunately biggest issue is the size, even with a standard UK yale key its too small and the key is too long to close the airtag section. will need to alter the print

@tainted.camper

i was just about to print this and my bigest key is a yale 6pin so think you

@user_44943116

Print Profile

0.16mm layer, 2 walls, 15% infill

@rlanci

Print Profile

0.16mm layer, 2 walls, 15% infill

@IcePrincess38

Print Profile

0.16mm layer, 2 walls, 15% infill

@tjcrnty

Print Profile

0.16mm layer, 2 walls, 15% infill

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.