Piastra Vixen Seestar S50 e Skywatcher Latitude

I created this plate to properly balance the Seestar S50 paired with the Skywatcher Latitude mount and prevent tipping with small tripods. The plate uses the same 3/8 screw available on the Latitude; simply unscrew it from its mount and screw it onto this one. A small spacer is included between the plate and the Seestar to prevent its feet from touching the plate when rotating. The plate has little play in the Latitude's clamp, ensuring good stability. It should be printed with at least 50% infill, preferably 65%, and 5 walls. I did not add any other ¼ or 3/8 holes to avoid compromising its rigidity. I did not detect any vibrations and experienced very few lost lights during a 2-hour session. Suggestions are welcome.