Search models, users, collections, and posts
Kid Cudi - Passion, Pain & Demon Slayin' hueforge
IP Report
Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
1.3 h
1 plate
Open in Bambu Studio
Boost
4
2
0
0
1
0
Released
Description
Project: passionpainds.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 133.33x133.33mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Bambulab Basic Magenta Transmission Distance: 5
PLA Bambulab Cyan Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 4.4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Magenta
At layer #9 (0.8mm) swap to Cyan
At layer #13 (1.12mm) swap to Jade White for the rest.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)