Search models, users, collections, and posts
Elegoo Mars 4/ Mars 4 Ultra - Z-Offset Spacer for Flexible Buildplate (Wham Bam, Koyofei, ...)
IP Report
Print Profile(1)
0.2mm layer, 3 walls, 5 bottom, 5 top, PLA-CF
Designer
8 min
1 plate
Open in Bambu Studio
Boost
6
11
0
0
32
4
Released
Description
To compensate for the thickness of the flexible buildplate, the Z-offset lever must be fitted with a spacer.
I have created several thicknesses, 1.5mm, 2.0mm, 2.5mm, 3.0mm.
I myself use a 2.0mm spacer for the KOYEFEI flexible buildplate, which can still be attached with the original screws. For 2.5mm and 3.0mm I recommend longer M3 screws.
Print the print file with 100% infill or with a sufficient number of top or bottom layers so that the spacer does not press in too much when the screws are tightened.
Use at your own risk.
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (0)