Triple G Workshop

I love this guy so much I blew him up to 367% (as big as my p1s would allow) and he is in the process of being painted and will reside in my garden!

Sidekickstitch

Printed a variety of these owl models at 33 mm tall. Worked out perfect as playing pieces for one of our favorite board games. This one was my wife's favorite. Only issue I had is I needed to make the plant stem slightly thicker.  Awesome job Triple G !!! 

Sprintcarr

This is #6 of the owl collection i have printed so far, this is the first one ive encountered any issues though,  just around the supports by the top of the flower (lost the top of it during cleanup) and it's beak.  Turned out acceptable anyway, another one for the collection.  Thanks

MsGrizleNZ

Custom Supports 0.2mm layer, 3 walls, 15% infill

Great print. Thanks for the model!
A1 mini, PLA lite, 0.08mm layer, 3 walls.

Kirill K

THOMSOH

Better Plant Support - 0.08mm layer, 3 walls, 15% infill

Exquisitely designed, printed at 125% scale

leonyang0885

nice and easy print. thanks for the model. 

Morodan

nice and easy print. thanks for this great model. 

 I couldn’t be more than happy with how this print turned out, I can’t wait to make a little Fellowship of owls So I can show them off on a shelf. 🖤🦉

jasonrichgar

Printed at 50% scale to better match my 20mm D&D miniatures. Used 0.2 mm nozzle on A1 Mini and Bambulab filament. Picture for size comparison.

Claytonresz

cover

2025-03-31_a4cu8v2trpsw.jpg

2025-03-31_8g319ble1oz1.jpg

2025-03-31_kh06lo02dxgj.jpg

2025-03-31_2vws2jggqgin.jpg

2025-03-31_qb18pn3ihr9o.jpg

2025-03-31_zhd1y6nov486.jpg

2025-03-31_h11oav36ohtd.jpg

2025-03-31_jtr2s2gcjx9g.jpg

plate_1.png

2025-03-31_zq0nk8miqmed.jpg

Salamattder

IMG_3319.jpg

Added manual supports for the plant.

DrOpticsOdense

20250413_095404.jpg

20250413_095427.jpg

Unfortunately, the top half of the plant is very fragile at this scale. It broke during printing for me, but you may have better luck.&nbsp;Print profile at 60% scale for 0.2mm nozzle and 0.06mm layer height.This gives maximum detail for a reasonably sized figure (around 40mm) without taking forever to print.&nbsp;I&#39;ve spent some time tuning in the support settings to avoid print failure due to issues with bed adhesion at this scale and layer height.The settings in this profile have given the best results on my A1 Mini with textured build plate (all I currently have).So, you may be able to get away with less robust settings on an XY core printer or with a different build plate type.&nbsp;There are minimal supports that are relatively easy to remove with some careful snipping of the stems and a little bit of patience.&nbsp;Main support settingsType: Tree (auto)Style: DefaultOn build plate only: YesSupport critical regions only: YesRemove small overhangs: YesInitial layer density: 100%Initial layer expansion: 10mmSupport wall loops: 2Support/object first layer gap: 0.10mmSupport speed: 50mm/sSupport interface speed: 50mm/s&nbsp;Other relevant settings:Initial layer height: 0.18mmSeam position: AlignedWall generator: ArachneWall loops: 3Infill: 5%, Gyroid

60% scale, 0.2mm nozzle, 0.06mm layer, 3 walls, 5% infill

<boostme><boosttitle>Boost Me</boosttitle></boostme>A mighty owl-man gardener with natural stealth, night-vision, and a green thumb! Collect them all!  If you snap off the top of the plant don&#39;t be sad, still looks good :)<figure class="image image_resized image-style-align-center" style="width: 80.3%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001267634/design/2025-03-31_7r6mfz8uzvuj.jpg"></figure><figure class="image image_resized" style="width: 78.94%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001267634/design/2025-03-31_2sz37czi72ir.jpg"></figure><figure class="image image_resized" style="width: 79.21%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001267634/design/2025-03-31_7uf6peaj1bjh.jpg"></figure> Check out the FULL COLLECTION  HERE: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/collections/5429990-owls-dragons">https://makerworld.com/en/collections/5429990-owls-dragons</a><figure class="image image_resized" style="width: 78.49%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001267634/design/2025-03-31_web7toj70gv1.jpg"></figure>Designed to print with Tree Supports on build plate only for EZ removal!Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)&nbsp;&nbsp;

Print Profile(3)

Description

Comment & Rating (66)

License

Related Models

The Botanist - Owls & Dragons

Print Profile(3)

Description

Comment & Rating (66)

License

Related Models