Drawer Kitchenware protectors. No more falling off

Drawers Kitchenware protectors

 

If you had enough kitchenware falling off the sides of the drawers look no further
these little protectors will clip the rail of your shelve and prevent any kitchenware falling off.
they are designed to fit 11mm rods that are 119-135mm apart from the shelve side wall. (see pictures for the measurements)

You may want to stick a piece of double sided tape at their thin part where the thin part touches the side wall of the drawer to help stick them in place but it is not really necessary as I've been using them for months without double sided tape and they do the job fine.

If you do put some tape, the tape will prevent the protectors from rotating upwards and help secure them in place as due to tight clearances at the outside of the sidewall (the shelf rail is very close to the side wall) they cannot hold the side wall from the outside as they would block the shelf from closing.

if you need them in different sizes like for example thicker or thinner rod or maybe longer pieced don’t hesitate to ask me as ill probably be able to accommodate your needs. 😊