Vaporesso XROS Case

A simple but effective case for the Vaporesso XROS Vape.  This is designed for the 3 and will update the files with cases for the other versions when I have them available to model.  There are two versions - a tight fitting TPU case which I personally prefer, and a PETG case which is a bit looser and has a push hole on the bottom to assist with removal.  Both will protect your vape from bumps and scratches but neither will protect it from water. 

There are holes which are sized for access to the USB-C port, intake with adjustable slider and the front screen and button.  The USB-C port is oversized to allow charging with a typical USB-C cable while the other two are cut to size.  These cases have flat bottoms to allow for greater contact with the build plate and optimal print results.  The TPU case will have some extra material around the screen which will need to be trimmed and the PETG won't.  I used a generic TPU 95A, please let me know your results with other types of TPU.  

The PETG case is a bit looser because removing it was extremely difficult so I added tolerance and the push hole to aid with this process.  

I hope you like this design and look forward to seeing your prints and the different colors you style your vapes with!

If you would like to sell these or any of my designs please subscribe to my commercial membership below.  If you would like to support me in bringing more awesome designs please do so with a boost or subscribe to my supporter membership.  I really appreciate each and every one of you that are generous to do any of these things, as it helps me purchase filament and supplies to keep going.