A1 Light Bar System
Copyright Claim
A1 Light Bar System
Boost
50
110
23
Print Profile(1)
0.24mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
Open in Bambu Studio
Boost
50
110
23
1
132
93
Released
Description
I HAVE POSTED STEP FILES THE LIGHT HAS APPARENTLY CHANGED SOMEONE GIVE ME THE NEW SIZE OR REMIX THIS PLEASE!!!
Link to Light: https://www.amazon.com/gp/product/B0C5N869QZ/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 All Printed with brim, skirt at on default speeds for draft preset.
Every Part/Set of Parts I have added to my printer or plan to:
Comment & Rating (23)
All
Print Profile
0.24mm layer, 2 walls, 15% infill
doesn’t fit light specified on Amazon. cut the top bracket and made it fit but the hole is too snall
(Edited)
The designer has replied
1
Reply
I have the same issue :(
0
Reply
Replying to @julied
It is a perfect press fit with mine, but mine is also a few months old
0
Reply
yeah same, doesn't fit. this needs to be remixed to fit
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
not as snug as I would want it to be
The designer has replied
0
Reply
they are purposely loose so if the hot bed snags the cable it would cause damage to the cord or a print fail. The cord side should be tight
0
Reply
where did you get the poop box I need that for my a1
The designer has replied
0
Reply
hi, You need to delete your files because it doesn't match the LED support is wrong!!
0
Reply
I ended up remixing this and now fits correctly, hope this works and helps you out
Thanks Drew for the designs!!
https://makerworld.com/en/models/154580#profileId-169028
(Edited)0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
Other Issues:it didn’t fit the light fixture that was linked in the discrimination. The fixture was too large for the the pieces.
0
Reply
I ended up remixing this and now fits correctly, hope this works and helps you out
Thanks Drew for the designs!!
https://makerworld.com/en/models/154580#profileId-169028
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
Strength Issue: Hält nicht sehr fest am Gerät
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.24mm layer, 2 walls, 15% infill
Support Issue
0
Reply
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRemixes (1)
Related Models
© 2024 MakerWorld