iNkosi3D

cover

IMG_3927.JPG

IMG_3916.JPG

IMG_3917.JPG

IMG_3918.JPG

IMG_3919.JPG

plate_1.png

plate_2.png

plate_3.png

2025-03-22_e122e2e527bf9.jpg

This can be printed in PLA or PETG (I used BBL HF PETG)0.2mm layer height0.4mm nozzelThe filament profile has (NC 15 ) no cooling for the first 15 layers to assist with warping along with brimPlate 1 - is orrietated in this way to increse strenght so the lauers run all the way through the pegs. In testing found that orrientating flat with pegs straight up and no supports the pegs just break off when you put pressure on them.&nbsp;

0.2mm layer, 2 walls, 15% infill

plate_4.png

plate_5.png

plate_6.png

Oblivion1286

d232920d-ad18-4868-8864-c8f9b8cbe56d.jpg

Remix of base and different peg situation. You can add/ subtract pegs in your chosen shape for this build.  I am pushing the pin ‘Pair’ though the back. Pins can be printed sturdier and replaced in this version.Files is on an X1C plate

0.2mm layer, 3 walls, 15% infill

Micks

Screenshot_208.png

Screenshot_209.png

Screenshot_210.png

reinforced pins by inserting reinforcement inside the model. Minimal Support0.2mm layer 3 walls 15% infill Giroyd

Pegs Reforced-Minimal Support-0.2mm layer-3 walls-15% infill

Visk

59cba8ff-627c-4c19-bf10-a26cac316504.jpg.jpeg

39091ade-9b6b-49c0-8858-c7976f62791e.jpg.jpeg

17f5e5c7-1fac-471c-946f-eaffebef1f9c.jpg.jpeg

Double-sided pegs and base

Advocado

VESA 75x75 Slim vertical monitor stand (Rev. 1.6)

VESA 75x75 Slim vertical monitor stand (Rev. 1.5)

The remix of the original model includes main post being made longer and i have removed the vesa mount plate and added the bars for displaying the dragons.

Dragon Sales Stand

Screenshot 2025-11-14 at 12.38.09 pm.png

Dragon Stand for P1S

ASIA

Print Profile(4)

Description

Comment & Rating (154)

This remix is based on

License

Remixes (1)

Related Models