Miata ND2 Vent Unit: T-RGB / T-Display

This is a vent unit to allow fitting a LilyGo T-RGB or T-Display Amoled into your Miata ND series air vent.  This is not plug-and-play, and expect to have to do some work.  You will need some foam tape around the vent to get it to fit snug into the opening.  One top plate screws on, the other would need to be glued. Choose one of the plates based on the TFT you are using.    Both are intended to use the silver ring from the original Miata vent.   You can check out my videos as I talk about various versions of this as I talk about my journey doing this mod to my ND2.  https://www.youtube.com/@PBStuffCo/videos