Lord Hanuman - HueForge II
Print Profile(1)
Description
Another Hindu God HueForge, this time for Lord Hanuman in Grayscale. Perfect for gifting and place in your Pooja.
HueForge Description:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.6mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Gray
At layer #20 (1.68mm) swap to Jade White for the rest.
My Other models :
You can find the Lord Ganesha statue here : https://makerworld.com/en/models/849074#profileId-796660
Another Hueforge for Lord Shiva is here : https://makerworld.com/en/models/913550-hueforge-lord-shiva#profileId-874720
My collection for more Hindu gods can be found here: https://makerworld.com/@Djelkgrove/collections/5049423-hindu-gods
NOTE: If you are using an AMS, then the above color change instructions are only for information. Just load and map the AMS accordingly and model has color change instructions in built. If you do not have AMS, then manually change the colors by adding pauses after slicing.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)