DALY BMS Mounting Plate Support LifePo4 K Series

This model  is a base mounting plate for the DALY BMS LifePo4 of the K Series family (J24K3).  

See photos for the hole center points for the mount dimensions to ensure it will fit your model and version.

This mount includes the following features :

• Lifting mounts to add a little air gap to help under tje BMS for better convection cooling 
• A large flat bottom surface if you want to use some "double sided foam tape" to mount the BMS module with the mount
• 4x BMS mounting holes for the Daly module using  M3 x 10mm self tapping plastic screws (see below for the BOM)
• Larger screw holes (3x) for mounting / bolting the plate
• Output posts (for B- / P-) with zip tie cleats to secure the power wires

[ Printing ]  No supports required, choose the material according to your application, I used PETG.

Licence and terms of use :

When you download the files, you understand and agree that this content is licensed under a Standard Digital File License.

You can : 

(✔) Personal use : Download the digital file(s) for free and print 3D parts from the digital file(s) for your own use.

You cannot :

(X) Sell parts : manufactured from the digital file(s) or any derivative of the digital file(s), no matter how the parts are made, how many parts are made.  This also prohibits you from selling parts made from the Digital file(s) on sites such as eBay, Etsy, FB marketplace or any other location. 

(X) Share the digital file(s) or resell them. 

Liability disclaimer and use:

By downloading the digital file(s) and making a 3D printed derivative object from it, you agree that you're doing it at your own risk and understand the limitations of 3D printed parts.  The digital file(s) are not a product and the design do not give any express or implied warranty that, any product made from the digital file(s), will work or perform in a certain way.