Triple G Workshop

cover

2025-03-17_6qcpc7l4fbrj.jpg

2025-03-17_88dgeehq3yjn.jpg

2025-03-17_a7ar6shidrek.jpg

2025-03-17_t9d8pxq3tjsa.jpg

2025-03-17_a0t368erqsfh.jpg

2025-03-17_ngrvdjsglsvz.jpg

2025-03-17_pafb7et4w2kr.jpg

2025-03-17_zr274l6oajz6.jpg

plate_1.png

2025-03-17_1bb9f0n3fmmg.jpg

Minimal Supports 0.2mm layer, 3 walls, 15% infill

DrOpticsOdense

20250326_182227.jpg

20250326_182251.jpg

20250326_182305.jpg

20250326_181823.jpg

Print profile at 60% scale for 0.2mm nozzle and 0.06mm layer height.This gives maximum detail for a reasonably sized figure (around 40mm) without taking forever to print.&nbsp;I&#39;ve spent some time tuning in the support settings to avoid print failure due to issues with bed adhesion at this scale and layer height.The settings in this profile have given the best results on my A1 Mini with textured build plate (all I currently have).So, you may be able to get away with less robust settings on an XY core printer or with a different build plate type.&nbsp;There are minimal supports that are relatively easy to remove with some careful snipping of the stems and a little bit of patience.&nbsp;Main support settingsType: Tree (auto)Style: DefaultOn build plate only: YesSupport critical regions only: YesRemove small overhangs: YesInitial layer density: 100%Initial layer expansion: 10mmSupport wall loops: 2Support speed: 50mm/sSupport interface speed: 50mm/s&nbsp;Other relevant settings:Initial layer height: 0.18mmSeam position: AlignedWall generator: ArachneWall loops: 3Infill: 5%, Gyroid

60% scale, 0.2mm nozzle, 0.06mm layer, 3 walls, 5% infill

<boostme><boosttitle>Boost Me</boosttitle></boostme>A freakishly powerful bird. A funny DND idea I had. Collect them all!  <figure class="image image_resized" style="width: 76.9%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001218484/design/2025-03-17_5sh3yzjhm3yy.jpg"></figure><figure class="image image_resized" style="width: 75.27%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001218484/design/2025-03-17_6j8mpb9mmcs6.jpg"></figure><h4>Check out the FULL COLLECTION  HERE: <a target="_blank" rel="noopener noreferrer ugc" href="https://makerworld.com/en/collections/5429990-owls-dragons">https://makerworld.com/en/collections/5429990-owls-dragons</a></h4><figure class="image image_resized" style="width: 78.49%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000001218484/design/bf1973a5-8194-48b0-aa5d-1e37ae1073ee.webp"></figure>&nbsp;Designed to print with Tree Supports on build plate only for EZ removal!Powered by image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

The Wizard - Owls & Dragons

ASIA

Print Profile(2)

Description

Check out the FULL COLLECTION HERE:
https://makerworld.com/en/collections/5429990-owls-dragons

Comment & Rating (99)

License

Related Models