Search models, users, collections, and posts
Rotary Microphone Phone Holder
IP Report
Print Profile(1)
0.2mm layer, 2 walls, 15% infill
Designer
1.9 h
1 plate
Open in Bambu Studio
Boost
6
8
1
0
8
3
Released
Bill of Materials
Bambu Filaments
Select all
List other parts
- 30mm M4 HEX Screw x 2: Normal 30mm HEX M4 Screw
- HEX or Butterfly M4 Nut x 2: HEX or Butterfly M4 Nut
Description
This is a Rotary Microphone-Phone holder. If you have an old rotary phone and you want to transform it to a microphone for singing live or record your songs with the typical noise of an old phone, you need a stand for it. With this adapter you can mount the rotary phone microphone as a normal microphone in every microphone stand.
You will find the .3mf file with:
- Holder, which is the base
- Closing part, which is the other half and you need 2 hex screws M4 and 2 nuts to close the two parts (look the pictures)
You will also find 3 .stl files:
- The same Holder you will find in the .3mf file
- The same Closing part you will find in the .3mf file
- The old version of the Closing part for shorter screws as you can see from the picture
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (1)