Search models, users, collections, and posts
Print Profile(2)
BOX BASE AND LID - 0.16mm layer, 4 walls, 15% infill
Designer
6.4 h
1 plate
LATCH - 0.2mm layer, 6 walls, 25% infill
Designer
21 min
1 plate
Open in Bambu Studio
Boost
255
649
37
18
632
211
Released
Bill of Materials
Maker's Supply Kits and Parts
Select all
Description
Small Latching Tactical Storage Box - Tools, Small Parts, Etc.
Prints great in PLA+ or better. PLA-CF is very nice. For sure use at least PLA+ for the latch. Perfect tool or small gear box. If you have a Tactical Elites Boresighter, it fits perfectly in this.
You need to download BOTH the BOX BASE & LID and the LATCH as separate items as they have separate profile requirements.
206mm Long - 101mm Wide - 40mm Tall
Uses only 4 pcs of a 3mm X 25mm Button Head Screws. Just thread them in from the outside and you are good to go. Snug is all you need. Do not over tighten. Keep everything centered while installing screws for smoothest action. Hinge will break in. I put wax on the threads before screwing them in but that is optional.
Latch can be VERY tight at first but it works in.
Example shown printed in Bambu Lab Lava Gray PLA-CF and Elegoo Rapid PLA+ Black.
This remix is based on
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
Comment & Rating (37)