Tactical Lunch Box/Storage Box/Rugged Box by Paulpaw

Paulpaw

Tools>Organizers

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls, 15% infill

Designer

5 h

2 plates

4.8(18)

0.2mm layer, 2 walls, 99% infill

22 min

1 plate

0.2mm layer, 2 walls, 15% infill

5 h

2 plates

Open in Bambu Studio

Boost

646

1109

356

134

Released

Description

Hi everyone this is my new EDC design, a tactical lunch box! Good for holding sandwiches or other smaller food for you to carry around.

The total usage of material should be within 150 grams. I used PETG for this print.

This guy will need two M3*10mm bolts and accordingly, two nuts used to fasten the bottom part.

The front lid and the T-shaped part are snap-fit. To connect, align the T-shaped part with the lid on the side with no gap. Then snap the other side in.

For Parts in Plate 2, please glue them to the body. Most of them should be tight-fit but just in case, add the glue to be safe.

Comment & Rating (41)

@Tim_Tank131

Boosted

Very cool model! some of the some bits definitely need glue (which is mentioned). I definitely want a much bigger version that I can fit a can and other stuff into, was thinking a full sized lunch box rather then just sandwich/small stuff. I will definitely get tons of use out of it though still for my mid shift food at my bar gig

The designer has replied

@Paulpaw

Hey man glad you enjoyed it! New ones are coming soon and yes this is smaller than most people have expected so I will make a larger version of this. Also, I will make other variations of the Lunchbox series🥳

@DUDUSFORGE

Replying to @Paulpaw :

I'm following you to see this when you release them,my work buddies will be jealous ✌️💪

@DUDUSFORGE

Print Profile

0.2mm layer, 2 walls, 15% infill

finally assembled it and it looks lovely ,if you can send the print through bambu studio and select tree supports for huge filament save ,also updated and added photos of my eva-01 paint job 😋

@Paulpaw

Yo man I saw your message but I couldn't reply cuz I's bleow level 7. I saw the broken piece i will try to upload the updated version. Thanks for pointing that out!

@DUDUSFORGE

Replying to @Paulpaw :

the thing is that the piece is not sturdy enough to withstand a little bit rough opening or forcing ,if you open it carefully it's fine but the moment you try to apply a little bit of force on the hinge it will break...

@BateristaTuga

Print Profile

0.2mm layer, 2 walls, 15% infill

top top

@diane.standing

Print Profile

0.2mm layer, 2 walls, 15% infill

great ideal will be using on my days out when weather improves thanks

@user_2392994581

Print Profile

0.2mm layer, 2 walls, 15% infill

@user_3529243316

why does it say pp on the side?

The designer has replied

@brutalfeit

Paulpaw, the author

Show original

@Paulpaw

Hahaha that’s short for Paulpaw, which is my name.

@Paulpaw

Hi friends I can not repond to message since my level is below 7, if you need to know anything or want to collaborate with me please leave a comment!

@yeldah

The A1 mini can (somehow) print this with the right G-code!

The designer has replied

@Paulpaw

Good to know that! I don’t have a A1 mini so I excluded it from the list.

@StirlingSwift

This is too perfect. Definitely coming back for this!

@user_2305445704

boo

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(3)

Description

Comment & Rating (41)

License

Related Models

Square storage box 80mmx80mmx80mm

Storage box 177 127 85

Tactical Axe Box Opener 10g No AMS

Small Rugged Latching Tactical Toolbox - Storage