FanMod V1

• FanModV1

It bothered me that the front area, in the direction of the glass door, could hardly or not at all be reached by the fan's airflow. That's why I designed my first version of the VanModsV1 to somewhat control the airflow without converting or even completely removing the entire fan.

This mod ensures better air distribution over almost the entire print bed and prevents the workpiece from being blown at specific points and the front area from being omitted.

• Installation:

Simply click it into the original fan. It should sit firmly in the fan without complications and should also be easy to remove.

• Update:

The Vires has made an improvement to the mod and I would like to share it here too.

The second print profile is the V2 variant with attached buttons, to prevent it from falling

under strong vibration or fan blowing at 100%.

_________________________________________________________________________________________________

• FanModV1

I was bothered that the front area in the direction of the glass door could hardly or not at all be reached by the fan's airflow. Therefore, I designed my first version of the VanModsV1 to somewhat control the airflow without converting or even completely removing the entire fan.

This mod ensures better air distribution over almost the entire print bed and prevents the workpiece from being blown at specific points and the front area from being omitted.

• Installation:

It is simply clicked into the original fan. It should sit firmly in the fan without complications and should also be easily removable.

• Update:

The Vires has made an improvement to the mod and I would like to

share it here too. The second print profile is the V2 variant with attached buttons,

to prevent it from falling under strong vibrations or a fan blowing at 100%.