Pokémon Go Plus + Sleep-Safe Case (V3!) - Free 3D Print Model

Search models, users, collections, and posts

Printorok

Toys & Games>Other Toys & Games

IP Report

Print Profile(4)

All

A1 mini

P1S

P1P

X1E

H2D Pro

H2D

X1 Carbon

H2S

P2S

H2C

X2D

A2L

V3 new design 0.2mm layer, 2 walls, 15% infill

Designer

2.2 h

2 plates

4.9(19)

V2 with Wrist Strap Window- 0.2mm layer, 2 walls, 15% infill

Designer

1.4 h

1 plate

5.0(10)

V1 0.2mm layer, 2 walls, 15% infill

Designer

1.1 h

1 plate

4.5(4)

Button Cover - 0.2mm layer, 2 walls, 30% infill

Designer

13 min

1 plate

5.0(2)

Open in Bambu Studio

Boost

103

220

391

320

Released

Description

If you have a Pokemon Go Plus + accesory, you know how easy it is to press that darn button and either initiating or stopping sleep research by accident. Well, this should help alleviate that.

I had been using a round metal tin (the ones that usually come with candy inside) to protect mine during sleep sessions and my daily walks, but I recently misplaced it, so I found myself in the need to get a replacement.

This case provides a perfect fit so the Plus + doesn't rattle inside*, and also has a handy window so you can still charge the device.

The lid is thick enough to the point where “butt dialing” the button should be a lot harder, but you still have full access to the button itself. With it, you can just throw it under your pillow and you won't stop your sleep research by accident!

The lid snaps on through pressure alone, but the pieces don't close completely flush (I left a little gap between them) so you can still easily open the case.

Update 08/25/25

I've added a new version!

My brother begged me to make one with a spot to put an AirTag because he keeps misplacing his Pokéball, so I figured it was also a good chance to refine the design a bit.

This new version comes with cut corners to reduce bulk, a prettier Pokéball logo on top, and also a sturdier and improved closure design. It's still a snap-on closure, but this one should be way stronger and reduce rattling. It is a quicker print, and also uses less material.

The print profile comes with two bedplates, you only need to print whichever version you prefer: with or without AirTag Pocket. I still recommend using a scrap of microfiber cloth as cushion under your decive, specially if you'll use the AirTag version.

Update 04/01/25

I've added a new print profile for a plug to cover the light-up button.

This is for the very specific need to block out the lights, it fits very snuggly and it's not made to be removed on a regular basis; please only print it if you don't normally make use of the button.

Update 03/26/25

* I've noticed slight rattling on the V2 model, probably due to the removal of the nub giving the device more room. If vibration becomes too loud inside the case, then adding a small scrap of microfiber cloth (or other thin soft material, such as a fabric band-aid) as padding for the underside will alleviate the issue (and protect your device).

Update 03/25/25

NEW!

V2 is now out, and it's compatible with the wrist strap. This comes with the added benefit that you can also check battery level through the wrist strap window.

V1 will also remain up: V1 has a little nub inside to help the device align itself instead of the window for the wrist strap.

Comment & Rating (62)

@Marvin1988

Boosted

Hey thank you very much for the great design An additional slot for the speaker would be an excellent idea I printed the case in Pokeball colors

The designer has replied

Show original

@Printorok

That looks pretty awesome! Thank you so much sharing the pic and for boosting.

@sammniam2

Boosted

Print Profile

V2 with Wrist Strap Window- 0.2mm layer, 2 walls, 15% infill

hopefully it will stop the sleep rollover stopping, but i carry mine on a lanyard clipped to my phone, it now weighs a ton 😆

The profile uploader has replied

@Printorok

Thank you for the pics and the review! That’s a great color for it. For extra success, I also recommend placing it button-down on the bed.

@sammniam2

Boosted

Replying to @Printorok :

Thanks, will try that tonight. As to the color, my favorite pokemon are ghastly, haunter & gengar 😀

(Edited)

@Marvin1988

Boosted

Print Profile

V3 new design 0.2mm layer, 2 walls, 15% infill

Everything worked wonderfully. Thank you for the design

The profile uploader has replied

Show original

@Printorok

Thank you!

@sammniam2

Boosted

Print Profile

V3 new design 0.2mm layer, 2 walls, 15% infill

needed a reprint t as the old one is worn & keeps coming apart, I like this new version so far, colored it to match my lanyard

The profile uploader has replied

@Printorok

Thank you very much for trying out the new one! Yes I need to think about durability, the current snapping system wears down over time.

(Edited)

@user_3253705918

Print Profile

V3 new design 0.2mm layer, 2 walls, 15% infill

sturdy print looks good

The profile uploader has replied

@Printorok

Thank you for your review and picture!

@RichLeclair

The plug does defuse the light quite a bit if printed in white! Also easier to get to the button for sleep mode to pop the whole top off! :D

@user_223359637

Print Profile

V3 new design 0.2mm layer, 2 walls, 15% infill

very nice.

@benazu25

Print Profile

V2 with Wrist Strap Window- 0.2mm layer, 2 walls, 15% infill

awesome print

@Superkick2sweet

Boosted

Print Profile

V1 0.2mm layer, 2 walls, 15% infill

I've been using this for two weeks and it's prevented me accidentally cancelling my sleep session during the night. It slightly bothers me that the two sides don't close flush together but maybe that's because I use it "upside down" in order to keep the wrist strap/pillow clip attached and there is a tiny nub that is meant to hold the Pokeball Plus+ in place when in the proper position. It'd be great if it had holes at both ends so I could charge it AND keep the wrist-loop/pillow clip attached.

The profile uploader has replied

@Printorok

Thanks for the rating. I would not recommend using it that way, since the nub might scratch the underside of your pokeball. if you wish to continue using it like that, I’d recommend perhaps melting the nub off (but it still won’t close flush because the wrist trap adds bulk). I never use the wrist strap so I hadn’t considered that use case. I may try making a version with a second hole in that location instead of the nub.

(Edited)

@Printorok

Hi, I've added a new version that is compatible with the wrist strap- as a happy coincidence it also makes possible to check battery levels without removing the case. Oh! and thank you for the boost!

(Edited)

@Superkick2sweet

Boosted

Replying to @Printorok :

Ah that's great - thank you for making this change so quickly! Will give V2 a try

(Edited)

@besbin

Boosted

Hi, Can you add a version without the main hole to click the button? I typically don't use that button and just rely on the auto catch feature and the led light on that thing is really annoying.

The designer has replied

@Printorok

huh, I take it you also don’t use it for sleep research then? I suppose making a plug to cover the window in one of the existing models would be a bit easier.

@Printorok

Hello, I've added a new print profile to make a plug that fits perfectly and snuggly into the window, over the button. It's a very quick and cheap print, I hope it'll be useful for this use case.