Print Profile(3)
Description
Boost Me (for free)
Creating a model like this takes countless hours and far more test prints than I can admit. If it brings a smile to your face, please consider giving it a boost. It costs you nothing, yet it helps me a lot. One boost is about 80g of PLA filament and keeps me creating.
There are these metal handbag holders.
I thought, why not just 3D print them?
Well, here's my design:
It's only slightly larger than the metal ones and completely print-in-place.
There are two versions: one made entirely of PLA and one with a TPU base. I recommend the version with TPU so the handbag holder doesn't slip!
The TPU simply clicks on; no glue is required. I tested "Bambu TPU 95A HF" and "Bambu TPU for AMS." The "TPU 95a HF" works better.
This design only works with Basic PLA. PETG is too flexible. Don't use matte PLA or Silk because of the lower layer adhesion.
If you print on a Bambu Printer, use the bed leveling and the flow dynamic calibration at the beginning of the print. Make sure you have good bed adhesion.
I recommend using my print profile. If you create your own, use 100% infill for the joints.
Give me your feedback! If there are problems, i'm happy to help. If you have any suggestions for improvements, let me know.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (116)