SlingShot RB-XL
Print Profile(2)
Description
Boost Me (for free)
A boost means a lot to me, it allows me to continue developing models like this, and best of all, it's completely free for you. If you like my design, feel free to give me a boost and follow. Thanks and enjoy.
Membership
I design, you sell. Let’s make it real. My models are free for personal use, but if you’d like to sell physical products made from them, you can get a Commercial License. ✔ Keep 100% of the profits. ✔ Sell locally, online, or at events. ✔ Support my work and help me keep designing new models. Your support makes a real difference — thank you for being part of this journey!
Slingshot RB-XL:
This is an XL model.
With a larger dimension than previous models, it can be a good solution for those who like to use elastic bands larger than 20mm, or have a large hand.
This slingshot has a fork opening of 110mm (outside forck) and a length of approximately 155mm.
The open handle allows the possibility of being decorated with paracord for greater comfort and grip.
The clamps allow the attachment of strips up to 26mm wide.
Tightening is done with M4 bolts and M4 nuts. In this case, 2 bolts have been added to this designed on each clamp for a greater guarantee of fixing the straps properly.
The sight** was adjusted to the height considering the 110mm opening of the fork.
With this RB-XL slingshot model you can take your challenge to another level.
I wrapped paracord around the handle and lined the fork with camouflage grip tape. Here is the decoration suggestion for your slingshots. (See photos on profile)
This slingshot was printed with four perimeters and 50% infill.
The clamps, printed with 100% infill, but also demonstrate sufficient robustness at 50% infill.
Extrusion nozzle: 0.4mm
Layer height: 0.2mm
Filament: Bambu Lab PETG HF
**To complete the fiber sight, I cut 4/5mm pieces of Translucent TPU and press them on the holes.
🔧 Model Information & Safety
This design has been carefully developed, tested, and refined to ensure good structural integrity and performance when printed under proper conditions and using appropriate materials.
Due to the functional nature of this object and the stresses involved during use, print quality, material selection, and correct assembly are critical factors. Improper printing settings, weak materials, or poor layer adhesion may result in structural failure and potential injury.
For best results and safety, the use of high-quality, reinforced filaments for the frame (such as PETG-CF or equivalent) is strongly recommended. Lower-grade materials may significantly reduce strength and durability.
Always inspect all parts before use. If any cracks, deformation, or weaknesses are detected, do not use the model.
⚠️ Usage Warning
Slingshots are not toys and can cause serious injury or damage if misused.
Always wear appropriate eye protection and operate in a safe environment. Never aim at people, animals, or fragile objects.
Use only suitable and safe projectiles.
Use at your own risk.
📜 License & Usage Terms
This model is provided for personal use only.
The following is strictly prohibited:
- Modifying, remixing, or creating derivative versions
- Redistributing or re-uploading this model or modified versions
- Commercial use of any kind
All rights are reserved by the original author.
⚖️ Disclaimer
By downloading and using this design, you acknowledge that you are solely responsible for the manufacturing, assembly, and use of the final product.
The author assumes no responsibility or liability for any damage, injury, or misuse resulting from the use of this design.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (79)