35-degree O4Unit lens standoff mount, compatible with the Black Widow Pro-V racing frame and similar frames with a 22mm bolt spacing
Print Profile(1)
Description
35-degree O4Unit lens standoff mount, compatible with the Black Widow Pro-V racing frame and similar frames with approximately 22mm bolt spacing.
Dimensions: Height 25mm, supports 6mm bolt diameter, 22mm gap between bolts (as shown).
Generally suitable for other frames if the dimensions are appropriate.
Printed using Easy-Print TPU 95a material at 210 degrees Celsius; this temperature works well. There may be minor imperfections around the lens opening.
Supports can be removed from the back using pliers; twist and pull. Pulling from the front is more difficult.
Installation as shown: Press the lower latch with your hand, insert the bottom of the lens, and gently press down on the top of the lens. (Once the bolt is installed, it is quite secure and usually won't fall off.)
Install the lens before inserting it into the frame standoffs!
Contact me for other lens angles. Non-commercial use only.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)