Godzilla 1954(Gorjira) with F-86 Fighter

Hello everyone. I kept meaning to get this up last year for the 70th anniversary of Gorjira but now will have to do. 

This is a model for the 1954 version of Godzilla with a printable F-86 Sabre to put in his claws. I have made the model 40% infill to ensure no issues with taking off supports, if you go lower please do not give a low rating because you decided not to follow instructions. It is a pretty detailed print that will take a good amount of time. AND ALWAYS CLEAN YOUR PRINT PLATE. Do not blame uploaders for print failures if you are not maintaining your machine.

PLEASE READ DO NOT IGNORE: If you plan on printing both the Godzilla and the F-86 DO NOT SCALE EITHER DOWN. The Godzilla is scaled up to be able to fit the plane in his claws. If you want to print just the Godzilla then don't worry about the scale. 

THE F-86 MUST BE PRINTED WITH .02 MM NOZZLE- The wings and tail are VERY FLIMSY printing with the 0.04 nozzle proved to be nearly impossible to get a clean result when trying to remove supports. IT MUST ALSO BE PRINTED FACING UP AS IS SHOWN IN THE PROJECT FILE. Again please do not print with the .04 nozzle and then complain that the F-86 didn't turn out well.

You can always glue the plane to the Godzilla claw or add small magnets if you want to be able to remove it at will. .25 inch magnets will work. If you don't plan on moving it very much then you can just rest it in his claw like in the photos.

I hope you enjoy this print and I always love seeing pictures along with ratings.