Filament Clip for 3DJake Spools

These filament clips were inspired by these Filament Clip for Bambu spools by 123cut. They fixed the one big issue I have with the otherwise greeat Bambu spools. 

I love those and wanted the same for my 3DJake EcoPLA spools, so I designed my own version for my spools. 

Features:

• Large chamfers to the bottom and the side to minimize the risk of filament getting stuck behind the clip.
• Easy to install with the split pins to make the clip snap securely in place.
• Wavy filament channel to provide just the right amount of resistance
• large opening for easy filament insertion.
• Easy to print
• Designed for the black plastic 3DJake filament spools for ecoPLA, easyPETG, niceABS and others. 
  • Also check out my filament clip for the transparent 3DJake spools next.

These are very easy to print. They snap right on the the spool and should fit tightly. I printed mine in PETG because I am afraid PLA would go too soft in the filament dryer.

You can also support my work on Ko-fi! 
Or, if you're interested in selling physical prints of my designs, check out my commercial license options there.

note:

I have noticed that the consistency of the hole size in the spools is not perfect. As a result the split pins of the clip broke on one particular spool. After a little sanding of the pins on the outside they snapped in perfectly like the others. Please let me know in the comments if you have any issues. Maybe some different size models could also be a solution to this.

If you want to support me, you can “buy me a coffee” at https://ko-fi.com/alwyn3d  

If you are looking for commercial license to sell prints of my models, check out my memberships at https://ko-fi.com/alwyn3d/tiers.