BTT Pi 1.2 Case
Print Profile(1)
Bill of Materials
Description
A BTT Pi 1.2 Case to cover it from dust and add a bit of protection.
In the 3mf file you have two plates with the standard base, feets and cover. To get the feets into the base, just press them in with a bit of force.
The cover slides in place, and has two tabs to free it and slide it back out.
I have also uploaded an additional base to be used if you want to power the pi with your printer's PSU. Furthermore, you have an extra cover with a cutout to use the pins. Click on Download STL Files and you will see them there.
I have added supports to the cover, but it should be fine without them too. Print to your liking and risk.
The print you see on the photos are done with Bambu PETG HF Gray and Bambu PETG Translucent Teal. PLA is also an option but the thin spacers between the USB ports could snap, so I'd rather print it with PETG if available.
Hope it helps!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)