Paint Brush Cleaning Pot

I've seen other paint pots, but they weren't exactly what I wanted so I decided to design my own from the ground up. My version includes: 

• Wide base for stability on the bottom
• Integrated vertical brush holder holes in the pot itself, reducing the overall footprint
• Smaller size overall, less space taken up
• Groove for temporary horizontal brush storage
• Threaded grooves on the inside so water will (in theory) run down the thread instead of standing in the groove
• Insertable grates for the bottom (I found that the grooves in the bottom can be hard to clean out and this also leads to rubbing the brush against more paint when cleaning. The grate allows you to run the brush across and the paint will settle on the flat surface below, making cleanup easier and keeping the water a little cleaner after it settles)
  • Grates are intended to be a little snug. May need to scale them up or down to fit best.
  • 2 grate options are available: horizontal slits or honeycomb. Honeycomb can be difficult to print, so optimize build plate for adhesion or choose the horizontal slit option if you're not up for the challenge.

Support me: buymeacoffee.com/dmack_3d